Basic Electrical Part 3

-

 

Comments

Post a Comment

Popular posts from this blog

Enhance Grid Stability

-
 Grid stability is crucial for the reliable and efficient operation of an electrical power system. Enhanced grid stability ensures that the system can withstand disturbances, maintain acceptable voltage and frequency levels, and quickly recover from disruptions. Here are several measures to enhance grid stability: 1. **Advanced Monitoring and Control Systems:**    - Implement advanced Supervisory Control and Data Acquisition (SCADA) systems to monitor and control the grid in real-time.    - Utilize synchrophasor technology for high-speed, time-synchronized measurements that provide a more accurate view of the grid's dynamic behavior. 2. **Wide-Area Monitoring Systems (WAMS):**    - Deploy WAMS to enhance situational awareness by collecting and analyzing data from various points across the grid.    - Use wide-area measurements to identify system oscillations, voltage instability, and other dynamic phenomena. 3. **Energy Storage Systems:** ...
Read more

Nodal Analysis

-
  Nodal Analysis 1. Nodal analysis can be applied for the planner and non-planner networks 2. Nodal  analysis is based on the application of KCL Note:  1. A principle node is a point where more than two branches are connected. 2. A simple node is a point where two branches are connected. The procedure of nodal analysis: Step 1:   Identify the total no. of principle nodes Step 2:   Assign voltages to each principle node and take one of the nodes as a reference node Step 3:   Develop KCL equations for each node(except for reference node) Step 4:   Solve the KCL equations to get node voltages A special case of nodal analysis(Supernode) A supernode exists in a circuit when two non-reference nodes separated by a pure voltage source The procedure of super nodal analysis: Step 1:   Identify the total no. of principle nodes Step 2:   Assign voltages to each principle node and take one of the nodes as a reference node Step 3:   If super node foun...
Read more

Understanding of series and parallel resistors

-
  In an electrical circuit, resistors can be connected in series or in parallel. The connection determines how the resistors behave and how they affect the current and voltage in the circuit. In a series connection, the resistors are connected end-to-end, so that the current flows through each resistor in turn. In a parallel connection, the resistors are connected side-by-side, so that the current can flow through multiple resistors at the same time. The relationship between the resistance, current, and voltage in a circuit with resistors connected in series is given by Ohm's law: V = IR Where V is the voltage across the resistors, I is the current through the resistors, and R is the total resistance of the circuit. The total resistance of a circuit with resistors connected in series is equal to the sum of the individual resistances: R = R1 + R2 + R3 + ... The relationship between the resistance, current, and voltage in a circuit with resistors connected in parallel i...
Read more